Methodical guidelines and techniques

Techniques and methodical guidelines developed by Energodiagnostika Co. Ltd and agreed with the Federal Service for Environmental, Technological, and Nuclear Supervision (Rostekhnadzor)

  • Methodical guideline for technical diagnostics of pipelines.
  • Methodical guideline for technical diagnostics of vessels and apparatuses.
  • The technique for assessment of steam boiler drums state.
  • The technique for assessment of boiler and steampipe bends state.
  • Methodical guideline for technical diagnostics of electrical submersible pumping systems (EPS) end parts.

Techniques and methodical guidelines developed by Energodiagnostika Co. Ltd:

  • The technique for assessment of steam turbine rotors state.
  • The technique for assessment of steam turbine blades state.
  • The technique for control of turbine rotors flushing holes.
  • The technique for assessment of individual parts condition in turbine equipment (studs, bearing inserts).
  • The technique for assessment of turbine bodies, cylinders, lock and control valves state.
  • The technique for assessment of generator sleeve tubes state.
  • The technique for assessment of compressor system blades and rotors state.
  • The technique for control of babbit abutment density on sliding bearing inserts.
  • The technique for detecting mechanical stress concentration zones in gear wheels.
  • The technique for control of crane pivots, buckets, hooks and hook hangers.
  • Technical guideline for engineering diagnostics of compressor-boring pipes and couplings.
  • Technical guideline for in-pipe diagnostics of heat exchangers.
  • The technique for control of production trees at oil and gas fields.
  • Methodical guideline for non-contact magnetometric inspection of gas and oil pipelines.
  • The technique for assessment of technical state of operating heat pipes using the non-contact magnetometric method (agreed with OJSC "MTC").
  • Instruction for inspection of heat pipes in manifolds without isolation removal (agreed with OJSC "MTC").
  • The technique for inspection of circular welded joints on gas and oil main pipelines by the MMM (agreed with OJSC "Gazprom").
  • Methodical guideline for inspection of large-diameter pipelines (530-1420 mm).
  • Methodical guideline for inspection of rolling-mill working and back-up rolls.
  • Methodical guideline for 2.0 and 2.6 mm steel wire inspection.
  • Methodical guideline for inspection of locomotive power components (frog, shaft, spline joints).
  • Methodical guideline for technical diagnostics of high-voltage line derrick guys fastening units.
  • Methodical guideline for expert inspection and lifetime assessment of excavator metal designs (rotary excavators, open-mine excavators, draglines) using NDT methods.